SD

Standard Heads
Shown in Standard White Finish

Dimensions
Height: 13.8″
Width: 10.3″
Depth: 3.5 ”

Round Heads
Shown in Standard White Finish

Dimensions
Height: 15.4″
Width: 10.3 ”
Depth: 3.5 ”

Maximizing remote head performance in a low-cost, traditionally styled fixture, the SD Series is capable of powering up to 100 watts in remote lamp loads.

Series Features

  • Standard Self Diagnostic Feature
  • Integrated Solid State System
  • Multi-Rate, Controlled, Automatic Charger
  • Fused AC Input & DC Output Circuit Protection
  • Lock Out (Automatic Battery Connect)
  • Low-Voltage Battery Cutoff
  • Brownout Sensitivity
  • Dual-Voltage Transformer for 120/277 VAC Operation
  • Maximum Input Rating
    120VAC 60 Hz 0.35 Amps
    277VAC 60 Hz 0.15 Amps
  • HIT Lamps
  • PAR-36 Sealed Beams
  • STD Lamp: See Unit Information
  • Sealed Lead Calcium Battery
  • 6 or 12 Volt Operation
  • Maintenance-Free
  • 20-Gauge Steel Housing
  • Rectangular Polycarbonate Head Units: Standard White Powder-Coat Finish
  • Round Steel Head Units: Standard White Powder-Coat Finish
  • Keyhole Mount
  • Red (Power On) LED Indicator
  • Test Switch
  • Meets or Exceeds UL 924

Unit Information

Model Number

Std. Lamp Watt

Watts per Hour

Replacement Battery

1.5

2

3

4

5

6

7

8

2SD6S5

6

12

9

6

(1) S65

2SD6S8

6

18

14

9

7

(1) S68

2SD6S10

6

32

24

16

12

10

8

7

6

(1) S610SL

2SD6S16

6

36

27

18

14

11

9

8

7

(2) S68

2SD12S7

7

36

18

18

14

11

9

8

7

(2) S68

2SD12S10

7

60

45

30

23

18

15

13

11

(2) S610SL

2SD12S15

7

100

75

50

38

30

25

21

18

(1) S1215

Illumination is rated to 87.5% of normal system voltage and recharge to full capacity within 48 hours.
NEC requires 1.5 hours of emergency illumination.

Options - Add Suffix to Catalog Number

-SuffixOption Description
-BCBeige & Cocoa Two-Tone Finish
-BGBeige Finish
-BLKBlack Finish
-P2Cord & Plug for 120VAC Input
-OWOff White Finish
-**Special Lamp Wattage

Ordering Information

H

2

SD
6
S
16
-12

Halogen Lamp Prefix

Lamp Heads on Unit

(0,1,2,3)

Series
DC Battery Voltage

Battery Type

(S – Sealed)

Battery Amp/Hour Options
For Rectangular Heads with Special HIT Wattage Lamps, add Lamp Wattage as Suffix Number.
For Round Heads with Special HIT Wattage Lamps, add Suffix “R” and Lamp Wattage.
For Round Heads with Tungsten Sealed Beam Lamps, add Suffix “S” and Lamp Wattage.
For Round Halogen Sealed Beam Lamps, add Prefix “H” and Lamp Wattage.
Note: Total Lamp Wattage cannot exceed 1.5 HR. Unit Capacity.