Self-Test/Self-Diagnostic Commercial Products
Standard Heads
Shown in Standard White Finish
|
Round Heads
Shown in Standard White Finish
|
Dimensions
Height: 13.8"
Width: 10.3"
Depth: 3.5 " |
Dimensions
Height: 15.4"
Width: 10.3 "
Depth: 3.5 " |
Maximizing remote
head performance
in a low-cost,
traditionally
styled
fixture, the SD Series
is capable of
powering
up to 100 watts
in remote lamp loads.
|
Series Features |
|
- Integrated Solid State System
- Multi-Rate, Controlled, Automatic Charger
- Fused AC Input & DC Output Circuit Protection
- Lock Out (Automatic Battery Connect)
- Low-Voltage Battery Cutoff
- Brownout Sensitivity
- Dual-Voltage Transformer for 120/277 VAC Operation
- Maximum Input Rating
120VAC 60 Hz 0.35 Amps
277VAC 60 Hz 0.15 Amps
|
|
- HIT Lamps
- PAR-36 Sealed Beams
- STD Lamp: See Unit Information
|
|
- Sealed Lead Calcium Battery
- 6- or 12-Volt Operation
- Maintenance-Free
|
|
- 20-Gauge Steel Housing
- Rectangular Polycarbonate Head Units:
Standard White Powder-Coat Finish
- Round Steel Head Units:
Standard White Powder-Coat Finish
- Keyhole Mount
- Red (Power On) LED Indicator
- Test Switch
- UL Listed
- New York City Approved/Calendar #38236
|
Unit Information |
Model
Number
|
Std.
Lamp
Watt |
Watts per Hour |
Replacement
Battery |
|
2SD6S5 |
6 |
|
(1) S65 |
2SD6S8 |
6 |
|
(1) S68 |
2SD6S10 |
6 |
|
(1) S610SL |
2SD6S16 |
6 |
|
(2) S68 |
2SD6S20 |
6 |
|
(2) S610SL |
2SD6S36 |
6 |
|
(1) S636 |
2SD12S7 |
7 |
|
(2) S68 |
2SD12S10 |
7 |
|
(2) S610SL |
2SD12S15 |
7 |
|
(1) S1215 |
| Illumination is rated to 87.5% of nominal system voltage and recharge to full capacity within 24 hours. NEC requires 1.5 hours of emergency illumination. |
Options
Add Suffix to Catalog Number
|
| -BC |
Beige & Cocoa Two-Tone Finish |
| -BG |
Beige Finish |
| -BLK |
Black Finish |
| -OW |
Off White Finish |
| -P2 |
Cord & Plug for 120VAC Input |
| -** |
Special Lamp
Wattage |
|
 |
 |
| |
| * (Not available on 2CL6536 and 2CL12515) |
Ordering Information |
H |
2
|
|
|
|
20 |
-12 |
Halogen Lamp Prefix |
Lamp Heads on Unit |
|
|
Battery Type
(S - Sealed) (N - Ni Cad)
|
|
Options |
|
For Rectangular Heads with Special HIT Wattage Lamps, add Lamp Wattage as Suffix Number.
For Round Heads with Special HIT Wattage Lamps, add Suffix “R” and Lamp Wattage.
For Round Heads with Tungsten Sealed Beam Lamps, add Suffix “S” and Lamp Wattage.
For Round Halogen Sealed Beam Lamps, add Prefix “H” and Lamp Wattage.
Note: Total Lamp Wattage cannot exceed 1.5 HR. Unit Capacity. |
Print this catalog page (PDF)
|
